Monday 17 November 2014

CP7311 Project Work Phase I And Phase II Model Report

By

ANNA UNVIERSITY PG REPORT FORMAT REGUALTION  2013:

Dear students As per your request I have here with enclosed the sample report for reference of CP7311 project work report model . Kindly through the guidance for project report which given below by Annaunivhub and prepare your report accordingly. 


A MANUAL FOR PREPARATION OF CP7311 PROJECT REPORT:


Each students of  ME / MTech Regulation 2013 must do a project in the 3rd semester Project phase I and in 4th semester the Project Phase II has to be completed and only the degree will be awarded to them. The report of Project CP7311 must be submitted in a document as a record during the end of the semester.

For ME Regulation Third semester Notes - Click Here

Anna University has a prescribed format for submitting the record those who are searching for the ME project record report model  and download below :

FOR ANY IEEE PAPER DOWNLOAD JUST MAIL THE TITLE TO OUR MAIL ID THAT IS MENTIONED BELOW WE WILL SEND YOU THE BASE PAPER FOR IT WITHIN 24 HOURS.

IMPORTANT LINKS FOR ME REGULATION 2013 CP7311 PROJECT REPORT MODEL:


Anna University Project report Guidance model for PG computer science engineering : Download

Anna university ME project Format - Download

A Manual For Preparation of Project Report - Click Here to Download

Project Front page,bonafide certificate,Tittle, Abstract,Acknowledgement,Table of content- Format download

ME Project computer science Report Format document type - Download

National Engineering PG project Format - Download

Anna University Chennai PG CP7311 Report Format - Download

ME Project Report work Guidance and Tips For the Students:

1.The size of project report should not exceed 60 pages of typed matter reckoned from the first page of Chapter 1 to the last page.

2.Arrangement of contents of project report: 
The sequence in which the project report material should be arranged and bound should be as follows :

1.                  Title page
2.                  Bonafide Certificate
3.                  Abstract
4.                  Acknowledgement
5.                  Table of Contents
6.                  List of Tables
7.                  List of Figures
8.                  List of Symbols, Abbreviations or Nomenclature (Optional)
9.                  Chapters
10.              Appendices

11.              References
The Tables and Figures shall be introduced in the appropriate places.

3.Page Dimensions and Margin :
The dimensions of the final bound copies of the project report should be 290mm x 205mm. Standard A4 size (297mm x 210mm) paper may be used for preparing the copies.The project report should be prepared on good quality white paper preferably not lower than 80 gms /Sq. Meter.Tables and figures should conform to the margin specifications. Large size figures should be photographically or otherwise reduced to the appropriate size before insertion.The final five copies of the project report (at the time of submission) should have the following page margins:

            Top edge                     :           30 to 35 mm
            Bottom edge               :           25 to 30 mm
            Left side                      :           35 to 40 mm
            Right side                    :           20 to 25 mm
The Tables and Figures shall be introduced in the appropriate places.

4.SEND A PAPER FOR PUBLICATION:
Every candidate doing M.E. / M.Tech shall send a paper for publication in a Journal / National & International Conference. An acknowledgement from the Supervisor for having accepted for publication in the Journal or presented in  National or International Conference shall be attached to the report of the project work. Such acknowledgements shall be sent to the Controller of
Examinations along with the evaluation marks by the team of examiners without which the thesis shall not be accepted.

5.PRESENTATION POINTS:
  • The presentation should have maximum of 12 – 15 slides
  • Presentation will be for 15 minutes
  • A draft copy of the conference paper to be prepared at the end of the phase 1 based on the project work.
  • System to be tested using testing software’s.

FOR IEEE PROJECT IN CHENNAI CONTACT US WE WILL HELP YOU WITH GOOD PROJECTS AT LOW COST. THE PROJECTS ARE  AVAILABLE IN BIGDATA, DATAMINIG, CLOUD COMPUTING, NETWORKING WITH IEEE PAPER.

FOR ANY IEEE PAPER DOWNLOAD JUST MAIL THE TITLE TO OUR MAIL ID THAT IS MENTIONED BELOW WE WILL SEND YOU THE BASE PAPER FOR IT 

These are the basic manual preparation of CP7311 project report if you have any queries regarding the project format please feel free to contact us at mvijayakumar92@gmail.com or annaunivhub@gmail.com thank you for reading the post so patiently.

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...

Search with Subject Code